The Wonderful World of Motorcycles

Motorbikes are considered heartthrobs in the automotive world. Bikes are conventional and normal bikes are used by ordinary, middleclass people who can not afford to buy themselves a car. It would not be an over statement that 90 percent of people who step into their professional lives and start learning buy a motor bike as a means of transportation. They can take their feet off the ground and flutter away on their vehicles.

These motorcycles are economic in many ways. Some third world countries have watched producing their local scooters and bikes so that almost anyone person who manages to save a little amount of money can afford a scooter easily.

This goes for countries that are on their way towards development. Motor bikes are not hard to assemble and there are people who have managed to build their very own bikes.

It does not consume as much fuel as cars do and they can easily adjust them between cars in the parking lot!

It is hard to categorize bikes because now the ordinary Yamahas are beginning to come in the markets with the same features as those of trail or heavy bikes. Not exactly the same but a lot of features are being installed in all kinds of bikes. They are now more comfortable and smooth to ride on.

Bikes are of numerous types. An ATV drift has become dominant over the past few years. In ATV there is a raptor 700R GYTR edition it's key features are much more advanced. It is appealing for bike lovers as it has special graphics system, all new skid plates and more powerful engine that can make this bike race in all sorts of riding environments. It is capable of riding smoothly in deserts, dunes and even thick woods. It is basically a sports bike and it is used in bike racing and over the years it has earned the reputation of the best racer in the world.

Such bikes are expensive and belong to the sporting world. They used to be rather plain featured as we have seen the trail bikes that come with extra shocks and special wheels. The latest bikes have no comparison; they are a complete package. Their bodies are light weight; they have bigger, smoother, comfortable cushion seats. And their over all performance is much more satisfying than people could imagine. Motorbikes are a joy to ride.

Dallas Commercial Real Estate Market Does A Rebound

Dallas City in Texas continues to experience steady growth in its real estate industry notably on the commercial side. This is not really a wonder as Dallas is a large city which accommodates several huge industries consisting of the petroleum, transportation, banking, information technology and telecommunications sectors. But despite the growing economy, Dallas remains to be among the most affordable cities in the U.S., according to Forbes.

The Dallas Texas real estate industry has also maintained its momentum since it began experiencing its booming days back in the 1980s. The Dallas commercial real estate including the big buildings and skyscrapers was a major growth factor. In addition, the Dallas metroplex accommodates numerous high-end shopping centers more than that of any other city or state in the U.S.

Experts reveal that the commercial real estate market in Dallas is in great condition compared to the residential properties. In terms of foreclosure, the percentage of Dallas office space, apartment, industrial and retail buildings is very small. This is due to the fact that commercial companies almost always have the financial resources to carry out their expansion and construction projects.

Dallas is seen to continue being a commercial real estate hub in the many years to come. Currently, new construction projects of condos and townhouses are widespread around this booming city. The other good news is that many of the office spaces previously available in Dallas have already been occupied or pre-leased. The central business district of the city has reduced its office vacancy rate to 24 percent as of end of September 2007.

The year 2007 has proved to be favorable for the Dallas commercial real estate sector. Latest reports from Cushman & Wakefield say office tenants that have been expanding and relocating have leased 1.5 million square feet more of office space in the Dallas-Fort Worth area in the first half of the year. The third quarter net leasing has also soared nearly 90 percent from totals in mid-2007. A recent report by Delta Associates showed that Dallas-Fort Worth is seen to accommodate an average of 4.8 million square feet of office space each year until 2010.

As for construction, an estimated 6.9 million square feet of office space is now being built in Dallas-Fort Worth as of the middle of 2007 and this is bigger than in 2006. Of the estimated office space being constructed, more than 40 percent is already pre-leased. Rents have also risen to seven percent from the 2006 rates. Third quarter figures show that office rents averaged $19.42 per square foot while rents for medical office space rose 12 percent to $24.4 percent.

With all these positive developments going on, the future of Dallas commercial real estate is indeed looking bright. Many real estate investment firms are seeing a low vacancy rate and substantial rent gains this 2007. Developers are also projected to provide 2.6 million square feet of office space by the end of the year while building owners are expected to ask for higher rents as a result of lower vacancy. The reduction in vacancies is being attributed to the surge in employment by 3.2 percent covering more than 900,000 jobs by year end.

There Are Famous Clocks in America, Too

When anyone mentions famous clocks, they probably think of Big Ben. This is most likely because the Clock Tower of Big Ben in London is the most recognized clock in the world. The clock tower was constructed in the 1830s, and the monument still retains the title of the World’s Largest 4-Faced Chiming Clock, even though it is no longer the largest clock in the world. You may not know it, but the United States has some landmark clocks, too.

The world’s largest four-faced clock is located in Milwaukee, WI. In fact, the clock faces of the Allen-Bradley clock are around twice the diameter of Big Ben. No chimes have been added to this clock so that Big Ben can keep the title of largest chiming clock. Each hour hand on this magnificent clock is 15.8 feet long and weighs 490 pounds while the minute hands are 20 feet long and weigh 530 pounds each. In addition, the numerals on the clock faces are 4 feet high.

Another large landmark timepiece is the Colgate Clock. At 40′ in diameter, it’s the largest single clock in North America. This clock is located at the Colgate-Palmolive plant which was the Indiana Reformatory for Men prior to being bought and renovated in 1923. Therefore, the Colgate Clock has been considered to be a major southern Indiana landmark for over seven decades.

The Loew’s Jersey movie palace has another architectural clock that is renowned in American history. The builders of the facility wanted to attract attention to their building. They decided that since it’s located in an area where thousands of shoppers and commuters were always rushing by that they could best attract attention by adding a clock designed by the famous clock maker, Seth Thomas. This gorgeous timepiece includes one of the few moving figure clocks that’s you can see on the east coast. The figures depicted St. George slaying the dragon, an accomplishment which was repeated every quarter hour accompanied by bells.

You need to visit Seattle in order to tour its famous Clock Walk. Free standing clocks with cast iron pedestals began to be erected as an advertising medium in the 1860s and ’70s. By the 1920s there were so many street clocks in Seattle that people began to refer to it as the “City of Clocks”. Although a number of the clocks have been removed in the past three decades, Seattle is still considered to have one of the most significant collections of street clocks in the country.

Buried in the small, central plains town of Spillville, IA, you will find the home of the Bily Brothers clocks. These two farmers whiled away the long winter hours starting back in 1913 by crafting some of the most unique floor clocks you can ever hope to see. Their first clock, produced in 1916, featured appearance of the 12 apostles every hour. The brothers were adamant about keeping their collection together. Even when Henry Ford offered a small fortune for one of their clocks, the Bily Brothers refused to sell. The entire collection was bequeathed to the small, nearby town of Spillville with the provision that the collection never be sold or separated.

If you really want to feel the scope of American clock making, you can visit the American Clock and Watch Museum in Bristol, CT. This museum houses over 1400 unique timepieces, most of which were made in the USA. The majority of the clocks are still running and chiming, so when the time comes around to 12 Noon, this is one of the louder sites you can visit.

As you can see, clock making is a favorite pastime of the American people as well as the British. By traveling throughout this great country of ours, you’ll be able to find numerous lovely timepieces that have become part of our heritage.

Sterling Silver Jewelry Exposed

Sterling silver jewelry is enjoying an unprecedented popularity with today's fashion conscious public. You know how beautiful sterling silver jewelry is and how brilliantly it shines. Now here is the rest of the story.

Silver has been used since ancient times, but has not survived as well as ancient gold because it tarnished and decomposes. There have been times, however, when silver was "in"; we are going through such a vogue today.

Silver is the most common of the precious metals. Fine silver is pure silver, which is used for jewelry because it is too soft. Sterling silver is 925 parts silver to 75 of copper, the alloy most often used. Silver weighs about half as much as gold, has greater flexibility, but is not as malleable, it has always been less expensive as well. A comparable piece of gold jewelry may cost four or five times that of a piece of sterling silver jewelry.

The current fashion trend toward black clothing has made silver jewelry more popular than ever. Silver likes to be worn; it stays cleaner & shinier through movement and friction. So sterling silver is a perfect accessory for today's fast paced lifestyles. Much like gold, sterling silver needs to be cleaned.

Care and Cleaning of your Sterling Silver Jewelry

1.) For daily cleaning it is recommended to use a simple jewelry polishing cloth that is impregnated with special jewelry cleaner. These are widely available and are very easy to use. Store your cloth in a plastic zip-lock bag, and keeping your jewelry drawer or armoire. It is a good idea to have one cleaning cloth for gold and one for silver.

2.) For a slightly more "in-depth" cleaning you may want to use a liquid jewelry cleaner.

3.) For cleaning badly tarnished silver, here's a neat little trick

a.) Cover the inside bottom of a heat-proof glass dish on bowl with a piece of aluminum foil, shiny side up.

b.) Place the tarnished silver in the bottom of the dish, contacting the aluminum foil.

c.) Add 1 heaping tablespoon of baking soda, and then slowly pour boiling water to cover the piece. The tarnish will gradually collect on the aluminum foil.

d.) Remove your silver, rinse thoroughly, and polish.

Here are Some Tips for Greater Enjoyment of your Sterling Silver Jewelry

1.) Are your silver chains all tied-up in knots? If so, here's a nifty little trick for straightening them out. Dust your chain with a little talcum powder and then try to unknot it. If the knot is stubborn, place a small drop of baby oil on a sheet of wax paper. Lay the knot in the oil and work it out with two pins; then clean the chain as instructed below.

2.) Always apply make-up, perfumes, oils or colognes before you put on your jewelry.

We hope you have enjoyed this special report. Please feel free to share it with your friends!